▼ Shown as : FF-120
Enerpac-Mechanical-Pipe-Flange-Tool,-FF120
Product images are for reference purposes only and may differ from the actual product.

FF-Series, Mechanical Pipe Flange Face Tool

The FF-Series, Mechanical Pipe Flange Face Tool offers safe, efficient and accurate refacing of flat pipe surfaces. 

  • Pipe Flange Cutting Diameter Range: ⌀ 25-305 mm / 1-12″
  • Internal Pipe Mounting Range: ⌀ 25-152 mm / 1-6″
  • Cutting Resultant Roughness: Ra 3,2 – 12,5  μ

FF-SERIES PRODUCT DESCRIPTION

Mechanical Flange Face Tool

Portable, hand powered tool makes even the hardest to reach pipe flanges ressurace-able in a safe and convenient way. 

Makes refacing easy

A simple and cost effective solution – the FF-120 turns a two man operation with heavy equipment, compressors and portable generators into a one man job. 

The FF-120 has interchangeable lead screws that make it suitable for resurfacing damaged flat-faced, raised-face or lens-ring joint flanges to the high safety standards required. After selecting the correct lead screw for the operation, the tool body is inserted in the pipe end and centres itself with adjustable locators to provide real concentric operation. 

The tool arm is then rotated by hand using worm-gear mechanism to provide a perfect spiral “gramophone” finish. The tool can be adjusted with a calibrated slide to define cut depth and the correct finish. 

Surface finish & accuracy

A serrated finish with 30-55 grooves per inch and a resultant roughness of between Ra 3,2 – 12,5 μ (125-500 microinches).

The FF-120 has same precision and quality of finish as a lathe. 

Cost effective solution

Small and portable enough to be a permanent addition to your equipment range, Enerpac’s FF-120 is the perfect solution to all of your small diameter facing problems. 

In Short

  • Makes refacing easy – hand operated machine tool can be set up anywhere without the need for air, electric or hydraulic power
  • Lightweight and portable (15 kg in storage box)
  • Adjustable cutting head for reface of flat surfaces of pipes with flange outside diameter facing range 25,4-304,8 mm (1-12″)
  • Interchangeable collets for ID mounting range 25,4 – 152,4 mm (1-6″) allow the user to work on many different flanges with minimal time between set-ups
  • Interchangeable lead screws suitable for refacing damaged raised-face (RF), flat-face (FF) or lens-ring joint flanges
  • Tool body with expanding collets centers itself providing real concentric operation

Complete in Wheeled Carrying Case
The FF-120 comes as portable set (15kg). Can be transported, easy et-up and operated by a single technician.

Set includes: 

FFL-kit with locators, O-Rings and extensions;
FSS-kit with feed screw and nut 1/2″- 20 UN for surface roughness Ra 1,6 – 2,4  μ
FSF-kit with feed screw and nut 1/2″- 11 UNF for surface roughness Ra 3,2 – 6,3 μ

Joint Separation Tools
FSC, FSH, FSM-Series parallel wedge spreaders provide quick and easy joint separation using hydraulic or mechanical force. 

Flange Alignment Tools
The ATM-Series provide safe and high-precision flange alignment tools that fit most commonly used ANSI, API, BS and DIN flanges. 

Enerpac FF-Series Information Package