PRODUCTS
Bolting and Torque Tools
Hydraulic, battery, pneumatic and DC electric bolting tools from Enerpac, AcraDyne and Chicago Pneumatic. Kiloton supplies them and keeps them working, with calibration, repairs, rental backup and training from acquisition to decommission.
Choose a bolting brand
Kiloton carries three bolting ranges. Each brand page lists every tool with its figures, what it is for and its data sheet.
HYDRAULIC BOLTING
Enerpac bolting tools
Hydraulic torque wrenches, pumps for wrenches and tensioners, nut splitters and flange tools, backed by Kiloton’s Enerpac-authorised service capability.
- Torque wrenches and multipliers
- Pumps for wrenches and tensioners
- Joint separation and alignment
DC ELECTRIC AND BATTERY
AcraDyne torque tools
Transducerised nutrunners and controllers that control and record every joint, for critical bolting and assembly.
1 to 17 000 Nm
Torque range across the AcraDyne system
- High torque and HTXD extreme duty tools
- Assembly nutrunners
- Cordless ABP-CTA and Gen IV controllers
BATTERY AND AIR
Chicago Pneumatic torque wrenches
Battery, pneumatic and electronic torque wrenches for repeatable torque without a hydraulic pump.
2 to 8 100 Nm
Across the CP86, CP66 and CP89 Series
- CP86 Series battery torque wrenches
- CP66 Series pneumatic torque wrenches
- CP89 Series eTorque wrench
Bolting tools for your industry
Pick your industry for the tools to start with and the Kiloton support that matters most on your sites.
Maximise uptime in remote mining environments with OEM-authorised tooling, onsite field service and lifecycle maintenance support, from acquisition to decommission.
Typical work: crushers, conveyors, earthmoving equipment and processing plant, often far from a workshop.
Start with
- W-Series Low Profile Hexagon Torque Wrenches (Enerpac)
- XC Series Cordless Torque Wrench Pumps (Enerpac)
- NS Series Hydraulic Nut Splitters (Enerpac)
- CP86 Series Battery Torque Wrenches (Chicago Pneumatic, Max 8 100 Nm)
Repair: Onsite service and repairs
Onsite repairs for bolting and torque tools up to 50 000 Nm, when the tool cannot leave site.
Keep projects moving by protecting uptime through rental continuity, expert training and technical support when site delays cannot wait.
Typical work: structural steel, cranes and site plant, where power and compressed air vary from site to site.
Start with
- S-Series Square Drive Hydraulic Torque Wrenches (Enerpac)
- CP66 Series Pneumatic Torque Wrenches (Chicago Pneumatic, Max 8 100 Nm)
- CP86 Series Battery Torque Wrenches (Chicago Pneumatic, Max 8 100 Nm)
- E-Series Manual Torque Multipliers (Enerpac)
Supply: Rent for the job
The rental range includes hydraulic torque wrenches, flange spreaders and nut splitters, plus training so your crew uses them safely.
Protect plant uptime with precision tooling, preventive maintenance and technically authoritative support backed by specifications and compliance documentation.
Typical work: assembly lines and plant maintenance, where every joint has to be right and on record.
Start with
- 2000 Series DC Nutrunners (AcraDyne, Max 55 Nm)
- Gen IV ACE Controller (AcraDyne, 1 to 17 000 Nm)
- CP89 Series eTorque Wrench (Chicago Pneumatic, Max 850 Nm)
- STTC-Series Safe T™ Torque Checker (Enerpac)
Maintain: Calibration and verification
Torque tool calibration and verification up to 50 000 Nm, with traceable testing procedures, as part of a preventive maintenance programme.
Support mission-critical uptime with OEM-compliant tooling, certified documentation and onsite response support for high-risk, high-compliance environments.
Typical work: flanges, turbines, pressure vessels and pipework, usually inside a planned shutdown window.
Start with
- HMT Series Modular Torque Wrenches (Enerpac)
- ZUTP Series Electric Tensioning Pumps (Enerpac)
- FS Series Flange Spreading Wedges (Enerpac)
- HTXD Extreme Duty High Torque Tools (AcraDyne, Max 17 000 Nm)
Maintain: Calibration with documentation
Calibration, load testing and failure reporting with certification documentation, for compliance, safety, insurance or audits.
Maintain safe, compliant infrastructure uptime through OEM-authorised tooling and predictive maintenance support across decentralised operations.
Typical work: track, rolling stock and substations, spread across many sites with no power on hand.
Start with
- CP86 Series Battery Torque Wrenches (Chicago Pneumatic, Max 8 100 Nm)
- ABP-CTA Ultra Torque Cordless Nutrunners (AcraDyne, Max 5 000 Nm)
- E-Series Manual Torque Multipliers (Enerpac)
- NC Series Single Acting Hydraulic Nut Splitters (Enerpac)
Maintain: Proactive maintenance
Scheduled inspections, calibrations and failure-mode detection that keep tools accurate between jobs.
Proactive maintenance Read: railway maintenance with Enerpac
Which bolting tool do you need?
Start with the job, then the power you have on site. Torque wrenches and multipliers tighten and loosen to a set torque. Tensioners stretch the bolt for an even clamp load. DC electric systems control and record every joint. Nut splitters and flange tools separate and align joints that will not come apart.
| Power source | Where it suits | Where to find it |
|---|---|---|
| Hydraulic | High torque from a compact head, driven by a pump. Low-profile hexagon models fit where a socket will not. | Enerpac: S, DSX, W, RSL and HMT Series, with TQ, XC, ZA4T and LAT pumps |
| Battery | Remote and onsite bolting with no air line or power cable. | Chicago Pneumatic CP86 Series, AcraDyne ABP-CTA Ultra Torque |
| Pneumatic | Plants and sites with compressed air, for repeat tightening. | Chicago Pneumatic CP66 Series, Enerpac PTW Series |
| DC electric | Controlled tightening by torque, angle or yield, with every joint recorded by the controller. | AcraDyne: HT, HTXD, 1000 and 2000 Series with Gen IV controllers |
| Manual | Torque multiplication by hand, with no power source. | Enerpac E-Series Manual Torque Multipliers |
Keep your bolting tools accurate and working
A torque tool is only as accurate as its last calibration. The Kiloton Service Centre calibrates and verifies torque tools up to 50 000 Nm and repairs them to OEM standards, and rental backup keeps the job moving while your tool is in for service.
SUPPLY
Rent the tool
The rental range includes hydraulic torque wrenches, flange spreaders and nut splitters, for breakdowns or once-off jobs where buying is not practical.
TRAIN
Operator training
Enerpac product training and hydraulic safety training, on site or at a Kiloton branch, so your team bolts safely and correctly.
MAINTAIN
Calibration and verification
Up to 50 000 Nm
Manual and hydraulic torque wrench calibration, with traceable testing procedures and certification documentation.
REPAIR
Onsite service and repairs
Onsite repairs for bolting and torque tools up to 50 000 Nm when the tool cannot leave site, with OEM-standard workmanship.
Bolting tool questions
Straight answers for maintenance managers, engineers and buyers.