Home / Products / Bolting Tools / AcraDyne
AcraDyne Electric Torque Wrenches and Nutrunners
AcraDyne electric torque wrenches and cordless tools, from 1 Nm assembly nutrunners to 17 000 Nm extreme-duty wrenches. Each tool measures the torque it applies and the controller records every joint. Kiloton helps you specify the tool and supports it after you buy.
1 to 17 000 Nm
Torque range across the AcraDyne system
250 to 5 000 Nm
Cordless range, ABP-CTA Ultra Torque nutrunners
1 000 000
Rundowns stored on the Gen IV iEC4WF field controller
Torque you can prove, joint by joint
AcraDyne electric torque wrenches and transducerised torque systems control and record every joint, for critical bolting where accuracy, traceability and quality assurance matter. A transducer in the tool measures the torque at the fastener, and the controller stops the tool at the target torque or angle and stores the result.
Kiloton is an authorised AcraDyne distributor, with technical application support, product selection, calibration and servicing support, and local after-sales service.
The AcraDyne range
Six tool series and two controllers, grouped by the work they do. Each card shows the torque range, what the tool is for and its data sheet.
High torque
AcraDyne
HTXD Extreme Duty High Torque Tools
6 500 to 17 000 Nm
Torque range
Extreme-duty DC tools for the largest critical joints, measuring torque at the square drive.
Dual J-handle models need both hands on the triggers to start.
DC electric · Transducerised
AcraDyne
HT Series High Torque DC Tools
200 to 8 100 Nm
Torque range, fixed and 360° swivel gearcase
Transducerised DC tools with torque, angle and yield control, in pistol, axial, lever and fixtured types.
Models from 8 100 Nm run on the Gen IV controller platform.
DC electric · Transducerised
AcraDyne
ABP-CTA Ultra Torque Cordless Nutrunners
250 to 5 000 Nm
Torque range, seven pistol models
Transducerised cordless nutrunner that controls torque and angle at the fastener, for high-torque work away from power and air.
One 18 V 5.0 Ah battery supplied. Charger sold separately: specify the 220 V model (AB-C18220).
Battery · Transducerised · 3/4 and 1 in drive
Assembly nutrunners
AcraDyne
2000 Series AcraDrive Discontinuous Drive Nutrunners
18 to 50 Nm
Torque range
One tool runs in continuous, discontinuous or combined drive mode, set in the Gen IV controller.
DC electric
AcraDyne
2000 Series DC Nutrunners
3 to 55 Nm
Torque range
Pistol, angle and inline nutrunners with onboard lights and audible operator feedback.
DC electric
AcraDyne
1000 Series DC Nutrunners
1 to 22 Nm
Torque range
Compact nutrunners for low-torque assembly, with an integrated transducer.
DC electric
Controllers
AcraDyne
Gen IV ACE Controller
1 to 17 000 Nm
Tool range on one controller
One controller runs any AcraDyne tool on one cable, with a 7 inch touch screen and data collection.
Controller
AcraDyne
Gen IV iEC4WF Field Controller
8.4 kg
Portable field controller weight
Weatherproof, rugged field controller for extreme-duty work above 5 000 Nm.
Stores 1 000 000 rundowns and 20 000 curves.
Controller · Field
Which AcraDyne tool do you need?
Start with the torque at the joint, then where the work happens. The Gen IV ACE Controller runs any AcraDyne tool on one cable, so one controller platform covers the range.
| The job | Torque and control | Start with |
|---|---|---|
| Extreme-duty joints | 6 500 to 17 000 Nm, measured at the square drive. | HTXD Extreme Duty, with the Gen IV iEC4WF Field Controller for field work above 5 000 Nm |
| High-torque critical joints | 200 to 8 100 Nm, with torque, angle and yield control. | HT Series in pistol, axial, lever and fixtured types |
| High torque away from power and air | 250 to 5 000 Nm cordless, torque and angle at the fastener. | ABP-CTA Ultra Torque, seven pistol models |
| Assembly lines | 1 to 55 Nm, in pistol, angle and inline tools. | 1000 Series (1 to 22 Nm), 2000 Series (3 to 55 Nm) and 2000 Series AcraDrive (18 to 50 Nm) |
| Running and recording the tools | Any AcraDyne tool on one cable, with data collection. | Gen IV ACE Controller |
Support for your AcraDyne tools
A transducerised tool is only as useful as its setup and its last calibration. Kiloton helps you specify the tool and controller for the joint, then services and repairs it so it keeps reading true.
SUPPLY
Application support
Technical application support and product selection, so the tool, controller and settings match the joint.
MAINTAIN
Local after-sales service
Local after-sales service through the Kiloton branch network, so support is close to your site.
MAINTAIN
Calibration and servicing
Calibration and servicing support for AcraDyne tools through the Kiloton Service Centre.
REPAIR
Onsite service and repairs
Up to 50 000 Nm
Onsite repairs for bolting and torque tools when the tool cannot leave site, with OEM-standard workmanship.
AcraDyne questions
Straight answers for maintenance managers, engineers and buyers.
Other bolting tools
Need hydraulic, battery or pneumatic bolting? Kiloton carries two more bolting ranges.
Enerpac
Hydraulic torque wrenches, pumps, nut splitters and flange tools.
Chicago Pneumatic
Battery, pneumatic and electronic torque wrenches.
All bolting tools
Compare brands by power source and by industry.