Shown as: PEJ-1401E
PE-Series, Submerged Electric Pumps
Product images are for reference purposes only and may differ from the actual product.

PE-Series, Submerged Electric Pumps

The Enerpac PE-Series, Submerged Electric Pumps offer the best performance for mid-range cylinders and tools. 

  • Reservoir Capacity: 5,5 litres
  • Flow at Rated Pressure: 0,27 l/min
  • Maximum Operating Pressure: 700 bar
  • Motor Size: 0,37 kW
  • Usable Oil Capacity: 5,5 litres
  • Two-speed operation reduced cycle times for improved productivity
  • Powerful 0,37kW induction motor is submerged in the oil reservoir to run cooler, protect the motor, simplify the pump interface, save space and reduce noise. 
  • Large 5,5 liters reservoir allows operation of a wide range of cylinders
  • 24 VDC remote pendant control on certain models for improved safety
  • Externally adjustable relief valve allows control of operating pressure without opening the pump
  • 40-micron internal return line filter keeps oil clean, promoting longer pump life. 
  • Full length side tube for easy monitoring of oil level. 

Gauges
Minimise the risk of overloading and ensure long, dependable service from your equipment. For use with the Economy pump the G2535L gauge and GA3 gauge adaptor are suggested. 

Hoses
Kiloton offers a complete line of high quality Enerpac hydraulic hoses. To ensure the integrity of your system, specify only hydraulic hoses.

Custom build your submerged pump

If the Submerged Pump that would best fit your application cannot be found in in the technical data above, the guide below will assist you to custom built your very own submerged pump. 

This is how a Submerged Pump Model Number is built up:

Example: PEM-1301E (The PER-1301E is a 0,3 kW, 700 bar, submerged electric pump, with 5,5 litres usable oil capacity, a 3-way, 3 position, remote solenoid valve and a 230V, 1 phase, 50/60 Hz motor.)

  • P: Product Type
  • E: Motor Type 
  • M: Pump Type
  • 1: Pump Series
  • 3: Valve Type
  • 01: Reservoir Size
  • E:Motor Voltage
  1. Product Type
    1. Pump
  2. Motor Type
    1. Electric Motor
  3. Pump Type
    1. J = Jog
    2. M = Manual
    3. R = Remote (Solenoid)
    4. S = Pressure Switch
  4. Pump Series
    1. 1 = 0,37kW, 700 bar
  5. Valve Type
    1. 0 = No Valve
    2. 2 = 3-way, 2-position, normally open
    3. 3 = 3-way, 3-position, tandem center
    4. 4 = 4-way, 3-position, tandem center
    5. Modular solenoid valve (PER only)
  6. Reservoir Capacity
    1. 01 = 5,5 litres
  7. Motor Voltage
    1. B = 115 V, 1 Ph, 50/60 Hz 1)
    2. D = 115 V, 1 Ph, 50/60 Hz with heat exchanger 1)
    3. E = 230 V, 1 Ph, 50/60 Hz 2)
    4. F = 230 V, 1 Ph, 50/60 Hz with heat exchanger  2)
    5. I = 230 V, 1 Ph, 60 Hz

1) Solenoid valves operate only at 60 Hz. Can run on 50 Hz with manual valves. 

2) Solenoid valves operate only at 50 Hz. Can run on 60 Hz with manual valves. 

The following submerged pump models include a modular solenoid valve and pilot operated check valve: 

  • PER-1301B
  • PER-1301D
  • PER-1301E
  • PER-1401B
  • PER-1401D
  • PER-1401E