▼ Shown as: HC-7206
Enerpac SFM-Series, Split Flow Manifolds
Product images are for reference purposes only and may differ from the actual product.

Enerpac SFM-Series, Split Flow Manifolds

Enables operation of up to 4 single-acting cylinders with minimal pump flow (0.2 l/min), rated to 700 bar operating pressure.

  • Inlet Connection: 1 x Power Pump
  • Outlet Connections: Max. 4 Cylinders
  • Minimum Pump Flow Required: 0,82 l/min
  • Maximum Operating Pressure: 700 bar

SFM-SERIES DESCRIPTION

  • Split-Flow Manifolds improve safety, precision and control in lifting and lowering operations
  • Pressure gauge, flow control valve in each outlet port; CR400 couplers installed in each inlet and outlet port
  • Regulates both advance and retract speeds: lifting and lowering
  • 1 inlet, 4 outlets. Maximum of 4 cylinders per manifold:
    • SFM41 for single-acting cylinders
    • SFM42 for double-acting cylinders
  • Minimum pump oil flow: 0,82 l/min to deliver 0,15 l/min per cylinder
  • Maximum difference among outlets: 10% of the stroke
  • More cylinders can be controlled simultaneously by connecting several SFM-models parallel

Pressure Gauges G2535L
Glycerine filled pressure gauges are installed in each outlet pressure line to monitor the pressure of each cylinder.

Optimum Performance 
Minimum pump oil flow must be 0,82 l/min to deliver 0,15 l/min per cylinder. Enerpac recommends to use Z-Class electric, air driven or gasoline pumps from the ZU4, ZE4, ZE5, ZA4 and ZG-Series. 

SFP-Series, Split Flow Pumps
When a higher accuracy is required across cylinder strokes in a multi-point lifting or lowering application Enerpac recommends to use the SFP-Series Split Flow Pumps. 

Load Holding
Use V66 check valves for load holding applications with single-acting cylinders. 

Hoses
Kiloton supplies a complete line of high-quality high-pressure hydraulic hoses. To ensure the integrity of your system, specify only Enerpac hydraulic hoses. Enerpac recommends to use hoses of the same lengths between the SFM and cylinders to improve system accuracy. 

Flow Control Valves
The Split-Flow Manifold has pressure compensated flow control valves installed in each outlet line. The oil flow from the SFM-Manifold to each cylinder can be adjusted by turning the knob on the valve. 

Enerpac SFM-Series Flow Manifolds Information Pack